|
|
NANMAC'S line of insulated electrical feedthroughs provide, in a ready-to-use package, from 2 to 10 insulated electrical leads per unit. Having flexible insulated leads on the "pressure" side (dimension C-only one pair shown for clarity) and 1 inch of bare wire on the "ambient" side, these electrical sealing glands can also be used to carry electrical current up to 0.8 amperes if desired. A wide choice of instrumentation feedthrough glands are available suitable for a variety of applications, to include various thermocouple calibrations, as are various termination styles and configurations for the ambient side; i.e. lead wire, connectors, etc. Units are made with stainless steel glands and have either 0-ring (OR Series), Pipe thread (A Series) or Conical metal-to-metal (HP Series) seals. They can be rated for use from low vacuum to 40,000 PSI pressure and temperatures to 500°F. All standard glands contain No. 24 gage AWG (0.020") solid copper conductors inside a 1/8" diameter stainless steel tube. These copper conductors are insulated from each other and the tube wall by a high temperature ceramic. The 1/8" stainless steel tubes containing the copper conductors are flexible and can be bent to most any desired angle in a radius as small as 1/2 inch. The stainless steel tube provides excellent shielding for each pair of conductors against unwanted electromagnetic noise or stray voltage pickup. Notes:
|
|||||||||
©2005 Nanmac Corporation - Framingham, MA USA |
