SIZES:
3 inch dial, 5
inch dial, Adjustable Tilt-Dial
CONSTRUCTION:
Head assemblies are 3-inch and 5 Inch diameter. Rugged, 300
series stainless steel case, bezel, fittings and stem. White
aluminum scale plate, with permanent black figures and graduations,
dished for "in-line" readings to eliminate parallax
errors, and a balanced black pointer. Head assembly is sealed
against dust, fumes and moisture. Glass window standard.
ACCURACY: Accuracy +/-1% of full scale. Temporary
over/under range is 50% of scale
SCALE LENGTH: Developed Length of 3"
scale is approximately 6", the 5" scale is approximately
10".
.
EXTERNAL ADJUSTMENT: Conveniently located
and easy to use; enables field re-calibration of thermometers
which have shifted out of accuracy. Also permits maximum precision
at any selected point within the scale range.
STEMS AND CONNECTIONS: Stainless steel, with
all joints welded; corrosion resistant to most acids and gases.
1/4" stem diameter is standard, lengths of 4, 6 and 9
inches with 1/2" NPT fixed thread connection. Various
size adjustable mounting fittings and
thermowells are available.
BI-METAL ELEMENT: A single low-mass helix,
which fits closely within the thermometer stem. Carefully
sized and aged, it is covered with silicone fluid to protect
it from moisture, improve heat transfer and to dampen pointer
oscillation.
IMMERSION: For accurate temperature readings,
the stem should be immersed at least 2 inches in liquids,
and 4 inches in gases.
DEGREES
per DIVISION by SCALE (Dual Scale)
| -40
|
to
|
160°F
|
in
|
2°
|
| -40
|
to
|
70°C
|
in
|
2°
|
| 0
|
to
|
250°F
|
in
|
2°
|
| -18
|
to
|
123°C
|
in
|
1°
|
| 50
|
to
|
500°F
|
in
|
5°
|
| 10
|
to
|
260°C
|
in
|
2°
|
