RTD PROBES With Various Termination Styles - I6 Series Bookmark this page!
Keyword Search this site

Specifications
The standard NANMAC RTD probes use a 100 ohm platinum element with Alpha = 0.00385. Sheath material is 304SS and can be either 3/16" or 1/4" diameter, and is 5 inches long.

Units are available with either a standard size plug, or Teflon insulated lead wire. When ordered with a plug it will come with a three prong plug, units with lead wire can be either 2 or 3 conductor and are available with stainless steel overbraid for added durability.

• Various size mounting bushings are available for use with these probes
• Longer sheath lengths or length lead wires, 4-wire units, various other sheath materials; inconel, nickel, etc. are available contact factory
• Various other termination styles are available for these units
• Typical construction does not allow for bending, contact factory if your requirement involves bending

QUANTITY DISCOUNTS:	1-20, None
	21-50, Less 5%
	51-100, Less 10%
	101 and over, upon request