H3 Series Digital Display and Controller
User selectable temperature or process control

PD765

 

 

   Field selectable inputs

4-20 mA, ±10 V, Thermocouple types E, J, K, & T and PT 100 RTD inputs

   • NEMA 4X, IP65 front panel
   • Shallow depth case 3.6" behind panel
   • 85-265 VAC universal power input
   • Serial communication adapter options
   • Two Form C 3 A relays option
   • Selectable fail-safe operation
   • Latching or non-latching
   • Pump alternation control
   • On & off time delays
   • 24 VDC @ 200 mA supply option
   • Modbus® RTU option
   • 4-20 mA output option
   • Dual 24 VDC supplies option

Contact a NANMAC Engineer

Click to Call 
Sunlight Readable Display 

Sunlight Readable Display   
   • Standard feature – no extra charge
   • Viewable under direct sunlight
   • Mount outside or inside



Serial Communications
   • RS-232 & RS-422/485 adapters
   • RS-232 to RS-422/485 converters
   • USB to RS-422/485 converters
   • MeterView® software
   • Data acquisition & programming

Meter View with an array of PD765
Meter Copy Feature
Copy Funtion

   • Save time and money using Meter Copy feature
   • Copy all settings to another meter in 10 seconds!
   • Standard feature (Meter Copy Cable required)
   • Reduce setup time, cost, and errors
   • Restore meter configuration from master meter
Programming Options
Configure Input
Set Relays/Alarms
• Selectable input
• Scale Input
• Decimal Points
• Temperature units
• Sensor Types
• Scale display
• Simple to use
• Select Mode
• Set & reset points
• Fail-safe operations
• On & off delays
• No Cryptic codes

Optional MeterView® software

Highlights

      Program or read meter settings
      Save meter profiles for cloning
      Use profiles for reporting
      Monitor up to 10 meters per tab
      Log up to 100 meters
      Acknowledge relays

Set-up, monitor & log 1 meter
Set-up, monitor & log from 1-10 meters

Set-up, monitor & log form 1-100 meters

Back To Top

Serial Communications, Adapters & Converters

Several different adapters are available for connecting your H3 Series meter to a standalone computer or computer network.

The 7000 and 8000 series adapters can be used to Convert, Combine, Isolate or Multi-Plex either one or several H3 meter inputs / outputs.