Multipair Thermocouple cable

NANMAC's multipair extension cables are available for thermocouple types J, K, T, and E. Each conductor is covered with a polyvinyl jacket with a nominal thickness of 0.015", pairs are individually twisted to reduce magnetic interference. The twisted pairs are cabled and then shielded with a 0.0015 inch thick aluminum-backed Mylar tape and a 20 gauge stranded copper drain wire to further minimize electromagnetic interference. The cable is then covered with an outer layer of PVC about 0.045 inch thick. A heavy easy-strip nylon thread is included. Each cable also contains a polyvinyl-clad 20 gauge copper wire for use as a signal connection. Cables are color-coded on the individual conductors and overall. The individual pairs are marked for easy identification.

NOTE: Temperature rating of this cable is based upon the limits of the PVC insulation. The continuous use limit of this cable is 176 Deg F (80 Deg C).

NOTES:
. For special multipair cables with other calibrations,
other insulations, metallic overbraid, etc. contact factory.
. Maximum continuous length is 300 feet. For longer lengths consult factory.