CIRCUIT BOXES and Single Circuit PANEL JACKS- F4 Series Bookmark this page!

SPECIFICATIONS

The STANDARD JACK CIRCUIT BOX (shown above) is available from 1 to 6 jacks and in two materials. Standard material jacks are good to 400°F, hi-temp jacks are good to 800°F. All hi-temp jacks are color coded RED, all standard jacks are coded per ANSI calibration.

The MINI JACK CIRCUIT BOX (similar to above except mini jacks) is available with from 2 to 6 jacks all Jacks are marked with ANSI calibration, color coded and numbered. These jacks are good to 400°F.

The MINI-CONNECTOR Single Circuit PANEL JACK (not shown) is assembled in a bracket for direct mounting in the standard 3/4" electrical box knockout. MINI-CONNECTOR panel jacks are good to an ambient temperature of 400°F. Standard ANSI calibration symbol and color code are easily visible from the front.

The STANDARD Single Circuit PANEL JACK (not shown) is assembled in a bracket for direct mounting in a standard 3/4" electrical box knockout. Available in two materials, the standard material is good to 400°F, the hi-temp material is good to 800°F. All hi-temp jacks are color coded RED, all standard jacks are coded per ANSI calibration.