Prongs
and inserts match ANSI calibrations to maintain sensing accuracy. Alloy
and polarity are identified by symbols molded into body. Molded
from glass filled thermoset compound for high strength. These connectors
are color coded to ANSI calibration and can be used in ambient temperatures
to 400°F continuous, and 500°F intermittent. Hi-temperature
connectors are all colored RED and can be used to 800°F continuous,
and 1000°F intermittent.
Inserts are spring loaded collets type to assure positive full contact
with the negative insert larger making it virtually impossible to mismatch.
Go
back
QUANTITY
DISCOUNTS: |
1-10,
None |
| |
11-24, Less
10% |
| |
25-50, Less
15% |
| |
51-100 Less
20% |
| |
101 and over,
upon request |
©2005
Nanmac Corporation - Framingham, MA USA |
