The F11-40 series is a basic, non-isolated easy-to-use two-wire transmitter for in-head mounting in DIN B and similar heads. Reduced height simplifies mounting in low profile connection heads. Needing no external power supply other than your LOOP power, the F11-40 can be used for three or four wire RTDs; as well as, thermoocuple calibration types B, C (W5), E, J, K, N, R, S & T.

Thermocouple input cold junction compensation (CJC) is fully automatic by means of an accurate measurement of the terminal temperature. Alternatively, the CJC can be disabled upon request. Also available are head mount enclosures with digital displays. Either regular duty or heavy duty, NEMA rated head mount displays.

This non-isolated device should not be used with multiple grounded junction thermocouples when, signals are input into each of their own transmiter. Then, all signals are input into the same data acquisition system. Use the F11-50 transmitter for these situations. All user specified information is programmed by Nanmac. Click the link provided for the Programming Request Form.