NANMAC'S line of hose clamp thermocouples consists of 3 basic styles

STYLE 1: Has a 1/8" O.D. by 6 inches long stainless steel sheath. The thermocouple wires inside the sheath are insulated with a high temperature mineral oxide insulation. Standard units have a grounded junction which is brazed to the stainless steel pipe clamp. Two (2) versions of the attachment are available: i.e. tangential and perpendicular. Unless otherwise specified, we will furnish the tangential style. (The perpendicular style is available upon request at no additional cost). The style 1 units have five feet of fiberglass insulated extension wire connected to the stainless steel sheath.

STYLE 2: Is the same as Style 1, except that the stainless steel sheath is deleted. The fiberglass insulated thermocouple wires are welded directly to the stainless steel pipe clamp.

STYLE 3: Is the same as style 2, except that the fiberglass insulated thermocouple wires have a stainless steel overbraid which reduces stray, unwanted electromagnetic pickup and increases lead wire durability.

NOTES

• All units come with 5 feet of 20 gage fiberglass insulated extension leads (other materials available)
• All thermocouples are mounted in 'tangential' style as shown above, unless "perpendicular" style is specified.
• All thermocouples are grounded to hose clamp for fast response. Contact factory for Un-Grounded units.
• All units are available in thermocouple types: T, E, J and K.
• Option include: Un-Grounded thermal junction, stainless steel overbraid on the fiberglass wire, as well as various wire terminations

ORDERING INFORMATION
When ordering, specify Part No. and thermocouple type. EXAMPLE: D6-5-J
To specify Un-Grounded junction add the suffix "-U" to the part number and $3.00 to the base price
To specify perpendicular style (versus tangential) add suffix "-P" to part number