 FLOW-THRU Thermocouples & RTDs - D1 Series Reference Bookmark this page!
Simple Installation Into Any Pipeline
Go back
FLOW-THRU thermocouples use either the NANMAC Right-Angle Ribbon Thermocouple sensor, or a Pt-100 Ohm RTD.
Available in Compression tube End, SAE-37 Flared End, Male/ Female NPT Thread & Sanitary tube designs.
-
flared union shown here, various union configurations are available-
FEATURES
- Thermocouple
junction has NO conduction errors.
- Junction can
be located flush with inner wall surface or protrude into the flowing
media.
- 20 Milliseconds
response time to temperature changes.
- Pressure range
to 4000 PSI.
- Temperature range
from - 320 to +1250 Deg. F.
- All stainless
steel fittings, other materials available.
- Sizes from 1/4
to 2 inches available.
| APPLICATIONS
INCLUDE
-
Chemical Processing
-
Heat Exchangers
-
Oil, Fuel, Gas, Water or Steam
- Food
Processing
-
Hydraulic or Pneumatic Systems
-
Foams and Pastes
-
Cryogenic Materials
-
Heat Transfer and Superheaters
- Plastics
- ANY
tube or pipeline where accurate temperature measurement is
required
|
|
