Extruder Thermocouples

EXTRUDER THERMOCOUPLES - C2B Series Bookmark this page!
for Plastic Melt Temperatures

NANMAC's plastic melt thermocouples are designed for use in extruder heads or die adaptors of injection molding machines with the Thermocouple sensor either flush or immersed into the plastic melt. The thermowell and sensor sheath are made of stainless steel. Standard units have an ANSI Type J (iron/constantan) thermal junction electrically grounded to the thermowell. The rigid unit has a standard two-prong plug connector, the flexible design has a flexible 12-in. armored extension, plus a connector plug. Ungrounded units, duplex units or other calibrations are available.

If you require the True Plastic Melt Temperature, with no conduction errors caused by the thermowell and millisecond response time, refer to these specially designed Plastic Melt Probes.

See Ordering Information Below

All of these standard melt thermocouples have a grounded iron/constantan (Type J) junction. Contact Factory for ungrounded units and other calibrations.

If longer than 12 inches of armor flexible leads are needed, specify length required when ordering. Add $2.00 for each 12 inches or fraction thereof.

ORDERING INFORMATION
(cable assemblies also available)

Part No.

diameter"A" (in.)

diameter"B" (in}

Termination

Price

C2B-1

C2B-2

C2B-3

C2B-4

C2B-5

C2B-6

C2B-7

C2B-8

C2B-9

C2B-10

Flush

1/4

1/2

3/4

Flush

1/4

1/2

3/4

3
3
3
3
3
6
6
6
6
6

Rigid

$42.00
each

C2B-11

C2B-12

C2B-13

C2B-14

C2B-55

C2B-16

C2B-17

C2B-18

C2B-19

C2B-20

Flush

1/4

1/2

3/4

Flush

1/4

1/2

3/4

3
3
3
3
3
6
6
6
6
6

Flexible

$48.00
each

QUANTITY DISCOUNTS:	1-9, None
	10-24, Less 5%
	25-49, Less 10%
	50-99 , Less 15%
	100+, Upon Request