The ADJUSTABLE PROBE unit includes an adjustable compression filling with standard pipe threads. The probe may be from 3/16" OD and up, though standard sizes are 1/4 and 3/8 inch. Length can be from 1 inch to as much as 24 inches long, with a standard length of 4 inches. Probe may be made from most any metal, plastic or phenolic compound. This style is ideally suited for gas and liquid surface and immersion applications. The SURFACE MOUNTED unit contains the "Right Angle" thermocouple on the end of the threaded thermowell. The thermowell is of stainless steel with straight threads (7/16-20 NF-2 by 13/32" long). It also contains an O-ring seal, the O-ring good to 450 Deg. F maximum temperature. At higher temperatures, the 0-ring must be removed and replaced by a copper washer. This flush mounted unit is ideal for applications requiring gas or liquid temperatures at the inner surface of a container wall. The FIXED PROBE unit contains a 1/4" O.D stainless steel probe on the end of a straight thread mounting busing (Size of threads 1/2-20 NF x 3/4" length) The fixed probe unit is ideal for measuring gas or liquid temperatures inside a container under high pressures. ORDERING
INFORMATION
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
©2005 Nanmac Corporation - Framingham, MA USA |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||