NANMAC'S Ribbon Thermocouple for surface temperature measurements contains a 0.002" thick Loop-Ribbon junction inside a spring-loaded protective shield. When applied against any surface, the protective shield retracts enough to allow the ribbon junction to make intimate contact with the wall. Because the ribbon junction eliminates conduction errors caused by the stem of the Thermocouple, true surface temperature of any wall or object is measured accurately. Response time of this new design is in the low milliseconds. Temperature range is from cryogenic to 600 degrees Fahrenheit (Higher temperature ranges on special request.)

FEATURES
. Low mass sensing elements
. Large contact area improves accuracy and eliminates conduction errors.
. Spring loaded protective shield protects probe from physical damage and produces the same contact pressure in each application.
. Available in ANSI calibration type K

APPLICATIONS
Hot plates, surfaces, walls, ovens, bearings, engine blocks, plastics processing machinery, ducts, steam lines, air, gases, etc.

NOTES
. All standard units are straight probes. If a 90° bend is desired, add (-90) to Part Number.
Example: Part number B7-3-90. Also, increase base price by $5.00. The 90° bend is made approximately
3-1/2 inches from the handle.
.Special units with other dimensions and calibration are available, contact factory with your requirement.

Part Number: B7-3
Price is $119.00