RIBBON AND WELDABLE TAB THERMOCOUPLES - B4 Series Bookmark this page!
For Surface Temperatures

The Model RCF Thermocouple has a flat ribbon sensing tip 1/2" wide X 7/8" long by ~0.002" thick and 3 feet of flexible fiberglass leads. This model has low millisecond response times.
The Model RCS Thermocouple is similar to Model RCF except that it has a 12 inches long, stainless steel clad, ceramic packed extension shaft. As a result, the sensor can operate up to temperatures of 2000°F maximum.
The Model WT Weldable Tab Thermocouple has a 3/4" x 3/4" x 0.030 in. thick stainless steel welding tab brazed onto a grounded junction, 1/8 O.D. thermocouple. It also has 3 feet of fiberglass insulated extension leads. The sensing tip has a maximum service temperature of 1000°F.
Note: These units are available in thermocouple types J,K E and T. The sensing tip can be easily mounted onto any surface with the use of an appropriate cement; i.e., glue, epoxy, ceramic cement or adhesive tape, depending upon temperature requirements. The WT model can also be mounted with small screws, the user must drill holes as required.
When ordering, specify Part No. and calibration. Example: B4-1-J. Standard length of flexible lead units is 12 inches, other lengths available upon request.	QUANTITY DISCOUNTS 1-10, None 11-20, Less 5% 21-50, Less 10% 51-100 Less 15% 101 and over, Upon request

Part No.	Model	Wire Size, in.	Dimension -A- inches	Dimension -B- inches	Dimension -C- inches	*Price
B4-1 B4-2 B4-3 B4-4 B4-5 B4-6	.RCF RCF RCS RCS WT WT	.020 .013 .020 .013 .020 .013	7/8 5/8 7/8 5/8 - -	1/2 3/8 1/2 3/8 - -	- - 1/8 1/16 1/8 1/16	$78.60 $83.00 $85.20 $89.60 $96.20 $100.60