 
GENERAL
PURPOSE THERMOCOUPLE PROBES - A8 Series
With One inch of Bare Leads Bookmark this page!
All replacement thermocouple
probes can be supplied with either spring-loaded or fixed mounting fittings.
The fittings are 304 stainless steel with 1/2 NPT threads for mounting
into walls, connector heads or thermowells. The
spring-loaded units (SL) allow up to 3/4 inch of travel. The welded units
(W) have the 1/2 NPT fitting brazed to the probe. All replacement units
are supplied with one (1) inch of bare leads.
-
When ordering specify: Part Number and length (standard length is
12 inches, specify your requirement) Example: A8-1A-12
-
When ordering spring-loaded (SL) or welded (W) fitting units, add
the suffix (SL} or (W) to the part number and add $15.00 to the
unit price, Example: A8-7A-16-SL, keep in mind that the bushing
"uses up" approximately 2 inches of the sheath length.
Please account for this when specifying length.
-
Duplex junction units are available on all models except 1/16"
diameter units, contact
factory for more information, as are various other
termination styles are available to suit your particular application.
|
