Flip forward

WASHER THERMOCOUPLES - A6 Series Bookmark this page!

Since the T/C wires are 180 Deg. apart, the true "average" temperature is measured.

Contact a NANMAC Engineer

Click to Call


Note:

  • Similar units are available using split lock washers.
  • Standard bare wire termination is shown above, standard size or mini connectors are available.
  • If lead lengths longer than 36 inches are required, specify length required and add $.75 per each additional foot of length to the base price.
  • Standard insulation material is fiberglass, which is good to 700 deg. F operation. For other insulation material, special designs or lock-washer configuration contact the factory.

QUANTITY DISCOUNTS:
 1-20, None
  21-50, Less 5%
  51-100, Less 10%
  101 and over, upon request
©2005 Nanmac Corporation - Framingham, MA USA