NANMAC's Thermocouple assemblies with various ceramic protection tubes are designed for high temperature applications. All units use a stainless steel support tube which protects the ceramic sheath from breakage while using an adjustable mounting adaptor. All units are closed end and are gas tight, thus these units can be used in a vacuum furnace. A secondary wire sea! is made at the terminating end to assure a vacuum tight seal even if the ceramic hot section is damaged. All units have an ungrounded thermal junction. See the pricing chart for the ceramic protection tubes that are available on this assembly.

When ordering specify part number, probe length and thermocouple type.

Example: A35-10-18-K specifies a type K thermocouple with an alumina sheath which is 18 inches long and 0.375 OD, all units come with a stainless steel support tube which is 4 inches long and 1/8 inch larger in diameter than the sheath diameter.

NOTES: