In addition to straight assembly units NANMAC offers a right angle type cold leg extension. NANMAC uses a general purpose (GP) connector head to make the bend instead of a pipe elbow. This GP connector allows easier maintenance, servicing and replacement of components; thus reducing your overall costs. The cold leg consists of a carbon steel pipe of specified length with 1/2" NPT threaded ends. The carbon steel extension terminates in a GP connection head with a 2 wire terminal block inside, the exit port is 1/2" NPT. Max service temperature of the cold leg and the GP connector is 1000°F.

ORDERING INFORMATION: When ordering this cold leg extension assembly, start with the part number of the thermocouple or RTD assembly you require, then and add the suffix CL (cold leg) and the length of the CL to the part number and adjust price accordingly.

Example: Part Number A33-1-18-CL-24, specifies an A33-1 Thermocouple with an 18 inch sheath, and a cold leg (CL) extension with a length of 24". For special designs or requirements contact the factory

Add this price to the unit price of the thermocouple or RTD assembly you require