HIGH TEMPERATURE THERMOCOUPLE PROBES - A12B Series Bookmark this page!
#24 Gage (0.020") Size Elements With Transition to Flex Leads
# 24 - Heavy Gage Element
The standard
probe contains an ungrounded Thermocouple assembly with a transition
junction, a stress relief spring and 36 inches of fiberglass insulated
#20 gage (0.032') extension leads. The extension leads are shielded
with a stainless steel overbraid.
The standard HTP Thermocouple is also available with a thick wall,
4' long support tube attached to the transition end. The purpose
of the support tube is to eliminate any damage to the refractory
sheath that may be caused by the mounting bushing. The support tube
is 1/8' larger in diameter than the Thermocouple sheath. If a support
tube is desired, add $20.00 to base price and insert the suffix
(ST) onto the Catalog number.
SPECIAL
NOTES:
• All of the above Thermocouples use #24 gage (0.020")
• size elements.
• Click here
for adjustable compression fittings and mounting bushings.
• Available with Standard, Mini or High Temperature Connector
attached, contact factory.
• Duplex and multiple units also available - call factory.
• When ordering, specify Part No., Length "L" and
ANSI Type; Ex, P/N-A12A-1-12-R.
QUANTITY
DISCOUNTS: |
1-10,
None |
| |
11-20, Less
5% |
| |
21-50, Less
10% |
| |
51 and over,
upon request |
©2005 Nanmac Corporation - Framingham, MA USA
