HIGH TEMPERATURE THERMOCOUPLE PROBES - A12 Series Bookmark this page!
#24 Gage (0.020") Size Elements with Standard Connector Attached

# 24 - Heavy Gage Element

The standard NANMAC high temperature Thermocouple probe consists of an ungrounded thermal junction within a closed end sheath. It also includes a set of standard matching plug and jack connectors with the male connector attached and the female connector (not shown) furnished with a cable clamp. Maximum service temperature of connector is 450 degrees Fahrenheit.

The standard HTP Thermocouple is also available with a thick wall, 4" long support tube attached to the connector end. The purpose of the support tube is to eliminate any damage to the refractory sheath that may be caused by the mounting bushing. The support tube is 1/8" larger in diameter than the Thermocouple sheath. If a support tube is desired, add $20.00 to base price and insert the suffix (ST) onto the Catalog Number.

When ordering, specify Part Number, Length "L" and Thermocouple Type; Example: A12-1-12-R.

SPECIAL NOTES:
• All of the above Thermocouples use #24 gage (0,020') size elements.
• Click here for adjustable compression fittings and mounting bushings.
• High temperature (800 deg, F) connectors and miniature plugs & jacks are also available
• Duplex and multiple units also available - contact factory

QUANTITY DISCOUNTS:	1-10, None
	11-20, Less 5%
	21-50, Less 10%
	51 and over, upon request