HIGH TEMPERATURE THERMOCOUPLE PROBES - A11C Series Bookmark this page!
#30 Gage (0.010") Size Elements With Transition to Flex Leads
The
standard probe contains an ungrounded thermocouple assembly
with a transition junction, a stress relief spring and 36
inches of fiberglass insulated #20 gage (0.032') extension
leads. The extension leads are shielded with a stainless steel
overbraid.
The
standard thermocouple is also available with a thick wall,
4" long support tube attached to the transition end.
The purpose of the support tube is to eliminate any damage
to the refractory sheath that may be caused by the mounting
bushing. The support tube is 1/8' larger in diameter than
the Thermocouple sheath. If a support tube is desired, add
$20.00 to base price and insert the suffix (ST) onto the Catalog
number.
|
SPECIAL
NOTES:
• All of the above Thermocouples use #30 gage (0.010') size
elements,
• Click here
for adjustable compression fittings and mounting bushings.
• All units are available with standard, Mini or high temperature
connector attached, call factory.
• Duplex and multiple units also available - call factory.
• When ordering, specify Part No., Length "L" and
ANSI Type; Ex. A11C-1-18-R.
QUANTITY
DISCOUNTS: |
1-10,
None |
| |
11-20, Less
5% |
| |
21-50, Less
10% |
| |
51 and over,
upon request |
