HIGH TEMPERATURE THERMOCOUPLE PROBES - A11A Series Bookmark this page!
#30 Gage (0.010") Size Elements and Standard Connector Attached

 

The standard high temperature Thermocouple probe consists of an ungrounded thermal junction within a closed end sheath. It also includes a set of standard matching plug and jack connectors with the male connector attached and the female connector (not shown) furnished with a cable clamp. Maximum service temperature of connector is 450 degrees Fahrenheit.

The standard HTP Thermocouple is also available with an optional, 4" long support tube attached to the connector end. The purpose of the support tube is to eliminate any damage to the refractory sheath that may be caused by the mounting bushing. The support tube is 1/8" larger in diameter than the Thermocouple sheath. If a support tube is desired, add $20.00 to base price and insert the suffix (ST) onto the part number.

SPECIAL NOTES:
•All of the above Thermocouples use #30 gage (0.010") size elements.
•Click here for adjustable compression fittings and mounting bushings.
•High temperature (800 deg. F) connectors also available.
•Duplex and multiple units also available - contact factory.
•When ordering, specify Part Number, Thermocouple Type and Length. Example:A11A-1-12-R.

QUANTITY DISCOUNTS:	1-10, None
	11-20, Less 5%
	21-50, Less 10%
	51 and over, upon request